3C Electronics Assembly
Precision pneumatic actuators for smartphone frames, modules, and final-assembly stations on high-speed production lines.
The SXL(R)32×20 Rotary Clamping Cylinder combines the 32 mm high-force bore with a 20 mm long clamp stroke, the most capable standard SXL variant…
The SXL(R)32×20 Rotary Clamping Cylinder combines the 32 mm high-force bore with a 20 mm long clamp stroke, the most capable standard SXL variant for deep, heavy clamping. Carroland built it for stations that must both reach and firmly hold larger parts in one motion.
The 32 mm bore delivers strong clamp force while the 20 mm stroke provides the reach to clear raised locators before seating. Rotation is selectable Left or Right, and the magnetic ring reports clamp state. The combined rotate-and-clamp action keeps the fixture envelope small despite the larger duty.
Product Features:
– 32 mm bore, 20 mm long clamp stroke
– Highest standard-duty force in the SXL range
– Integrated rotation + clamping in one cycle
– Left (L) / Right (R) rotation available
– Magnetic-ring position feedback
Technical Overview:
– Series: SXL(R)32X20
– Bore: 32 mm
– Stroke: 20 mm (long)
– Rotation: Left (L) / Right (R)
– Operating pressure: 0.1–0.7 MPa
Why it fits 3C automation: When a clamp must reach over a feature and still apply full force, the 32/20 pairing removes a separate approach actuator and protects cycle time.
Applications: iPhone assembly heavy clamping with raised locators, deeper rotary press-fit, and fixtures needing long combined rotary-clamp travel.
Engineered with European Technology · China Manufacturing · Since 1992, the SXL(R)32×20 belongs to Carroland’s certified pneumatic range for iPhone production lines.
Specifying your unit: Confirm the 32 mm bore and 20 mm long stroke, select Left (L) or Right (R) rotation, and specify porting and sensing at order. Carroland supports non-standard configurations for dedicated production lines.
Trial before you commit — order a sample pneumatic cylinder to verify fit on your line. Standard pneumatic cylinder MOQ is 1 piece; pneumatic cylinder lead time is 7-15 working days for samples. Negotiate volume pricing and request a quote from a pneumatic cylinder supplier.
Precision pneumatic actuators for smartphone frames, modules, and final-assembly stations on high-speed production lines.
Clamping and positioning components that reduce fixture envelope and station count in automated tooling.
Holds housings steady through adhesive dispensing and UV-bonding for repeatable, clean joints.
Magnetic-ring position feedback confirms actuation state before each measurement cycle begins.
Supplied into smartphone production lines with the documentation and consistency that tier-1 electronics manufacturing demands.
Designed to ISO 15552 dimensional standards — direct replacement without modifying equipment mounting plates.
Standard magnetic ring assembly works with a magnetic switch for on-demand position feedback — no disassembly required.
Rubber cushion type absorbs end-of-stroke impact for smooth, low-noise operation that protects delicate fixtures and parts.
A rotary clamping cylinder combines rotation and clamping in one stroke - it swings then locks a workpiece. Built on a double acting pneumatic cylinder mechanism, Carroland SXL series serves high-load, high-repeatability 3C stations.
A pneumatic actuator cylinder converts air pressure to controlled motion for automated actuation; our SXL rotary clamping units are a specialized pneumatic actuator for simultaneous rotate-and-clamp duties on iPhone fixtures.
Yes. The cylinder is designed to ISO 15552 dimensional standards, so it drops into existing equipment as a direct replacement without modifying mounting plates. Port thread is PT1/8.
Send your fixture drawing or line requirement. We reply with sizing, lead time and a quote — typically within one business day.
